SN 500 Series Plummer Block

For bearing housings where the strength of grey cast iron is still insufficient, cast steel or spheroidal graphite iron (ductile) housings can be supplied. These bearing housings can support approximately twice the load permitted for grey cast iron housings.
These bearing housings are interchangeable in dimensions and are compatible with bearings manufactured by international companies such as SKF, FAG, NTN, ZKL, TIMKEN, and others.

Garang Equipments Co  SN, SNA, SNH, and SNL housings are interchangeable for the same bearing size and mounting dimensions.

All housings are supplied in the non-located configuration. A suitable locating ring – FRB – must be ordered separately for the locating type.

SN 500 Series Plummer Block

SN 500 series plummer block is interchangeable for the same bearing size and mounting dimensions. A Locating Bearing is arranged by embedding one or two Locating Rings, depending on the case, for its axial location. The SN Series Plummer Blocks Can Be Lubricated With Grease. Felt Strips and Grease Nipples, as well as Plummer Blocks, can be ordered separately.

Customers make extensive use of our SN Series Plummer Blocks used as Flange Blocks. The bearing seat width in the SN Series Plummer Blocks is such that bearings have axial freedom. A locating bearing is positioned by inserting one or two locating rings, depending on its axial location. The SN Series Plummer Blocks can be lubricated with grease. Plummer Blocks can be ordered with felt strips and grease nipples. SN Series Plummer Blocks with horizontal metal labyrinth seals are available for dusty environments.

SN 500 series plummer block diagram

 

SN 500 series plummer block Catalogue 

We also offer SNA plummer block. the difference between SN and SNA plummer block is SNA plummer blocks are a progression of SN plummer blocks. The dimensions of both SNA and SN housings adhere to ISO/R 113, and series SNA 5 and SNA 6 housings are interchangeable with those of SN 5 and SN 6, respectively. However, the SNA housings are much stronger.

What are the parts of plummer block?

A spherical roller bearing or self-aligning ball bearing assembly and a bearing housing with a sealing device. Depending on the application, the bearing housing is typically made of cast iron, but it can also be made of spheroidal graphite cast iron (Ductile cast iron) or cast steel.

Garang Equipments Co manufacture four types of plummer block housings: ‘SNA’, ‘SN’, ‘SNL’ and ‘SD’ plummer blocks.  SNA plummer blocks are intended for use with bearings on adapter sleeves or with a cylindrical bore.

Brand

Colour

Reviews

There are no reviews yet.

Be the first to review “SN 500 Series Plummer Block”

Your email address will not be published.

Call Now